Loading... Please wait...

FEIG Mid Range UHF RFID Reader Module w/power supply

  • Image 1
Calculated at checkout

Product Description

This is FEIG ID ISC.MRMU102-A UHF Reader Module (RS232, USB)  # 3779.000.00, with power supply 9999.220.00.

This module receives power on a 2 pin molded connector.  The mating part is Molex 22-01-3027 with pins 08-50-0114.  Power cannot be fed on the RS232 port of this reader and it will not operate on USB bus power.

GlueLogix can quote the module without power supply and in greater quantities.

Description from the FEIG UHF page at GlueLogix.com:

This is the bare board version of the fixed MRU02 shown below.  It has higher power and sensitivity than the MU02, and is classed by FEIG as a Medium Range reader.


  • UHF Gen2 aka. ISO18000-6C
  • Frequency range is 860-960 MHz
  • USB is Full Speed with composite device endpoints, requiring Feig DLLs for interface
  • USB connector is full size B for use with standard cables
  • RS232 is 4800 to 230400 baud
  • 6 transmit power settings:  500 mW (27 dbm) down to 50 mW (17 dbm)
  • Power consumption max. 7 W
  • CE Mark is Class 2
  • 3 SMA antenna ports, software selected
  • 1 on board near field antenna, software selected
  • 12 to 24 VDC supply.  External power is required for USB.

FEIG model:

  • ID ISC.MRMU102-A UHF Reader Module (RS232-DB9S, USB-B) 

Special Features:

  • Buffered Read Mode


  • NOT compatible with the GlueLogix HF Reader Case!

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the FEIG Mid Range UHF RFID Reader Module w/power supply to your wish list.

You Recently Viewed...